B&B Packaging Technologies, L.P.

The Matador from B&B packs a wide variety of products with kraft paper wrap or banding. Paper-based wrap options are a paper sleeve wrap with open ends or fully wrapped with side folding and sealed/closed with hot melt. B&B wrapping equipment can be combined with other case filling, film wrappers and shrink tunnels in a seamless, complete end-of-line packaging operation. In addition, the company offers wrapping systems using film such as shrink tunnels and the Rotary Roll packer RO, designed for the packaging of cylindrical products in a film banderole at a high level of performance up to 120 cycles/min.

See the Wrapping Equipment page on this company's website.

B&B Packaging Technologies manufactures sealing equipment for bags including the CPH-WPP, designed for aligning and sealing woven PP bags and paper bags by using the hot air sealing method and plastic bags by impulse sealing after the filling process. Bag aligner and sealer eliminates the need for pre-applied hotmelt. Sealer can be implemented in existing filling lines and runs up to 65 bpm.

See the Pre-made Bag Loading & Sealing page on this company's website.

Film packaging machines for multipacking feature modular designs and collation units that are adapted to the end user’s product, packaging and space requirements. B&B stretch packing technology utilizes servo drive technology for precise film control allowing for very tightly wrapped products without an additional shrinking process. Film wrapping compatible in combination with tray and case erection and loading equipment. The B&B stretch packer series precisely wrap single products or multi-unit formations in economical one pass wrap or two directions for full, dust proof coverage. Designed to save energy and money with higher performance when compared to full shrink tunnel packers, the system can bundle irregular shapes, low COF packaging and non-rigid packages into optimized solid formations with thin, high stretch films resulting in efficient, improved pallet unitization with less transport shift/damage and reduced waste. B&B’s RO Rotary Roll packer is designed for the packaging of cylindrical products in a film wrap at high speed, up to 120 cycles/min. Cylindrical products or stacks of smaller cylinders can be arranged and packaged in formations to meet specifications.

See the Multipacking Equipment page on this company's website.

B&B offers a variety of different solutions in case packing, tray, tray with lid, wrap-around or RSC case packaging options for the effective protection for the transport and storage of products. B&B’s Universa is a fully automatic case packaging machine which erects and fills up to 15 cpm in a top load, pick-and-place process before closing cases with hot-melt or adhesive tape. Suitable for the end packaging of glasses, bottles, cans, coils, molded bottles and other kinds of products suitable to be transported using vacuum grippers. The B&B Combimatic tray and wrap-around case packaging machine is a servo-mechanical system which fills product and closes/seals with hot-melt glue from flat carton blanks. Bottom trays, high board trays with U-shaped or tray-lid and wrap-around cases are all packaging options offered with the Combimatic at speeds of up to 25 cycles/min. The Kartomat KVA series from B&B is designed to fill and seal RSC type corrugate cases with a wide variety of products including, folded cartons, cylindrical products (garbage bag rolls, wallpaper rolls, stacked cans) and paper products. Closing options of hot-melt and adhesive tape at speeds of up to 30 cpm are possible. B&B case filling equipment can be combined with B&B film wrappers or shrink tunnels in a seamless, complete end-of-line packaging operation.

See the Case Packing Equipment page on this company's website.

Tooling for B&B’s Robotic LEAP (Line Extension Automated Packaging) is custom designed for combination bag/sack packing and case and slip sheet manipulation. LEAP is an innovative development to automate the packaging process of bags and pouches into cardboard boxes. With B&B’s simple user interface and software, no special programming skill-set required to properly configure pack patterns.

See the End-of-Arm Tooling page on this company's website.

B&B’s bag and pouch converting equipment features in-line reclosable options. In addition, its top closure system (TCS) can apply reclose features to pre-made bags out of line. The TCS runs up to 55 pre-made plastic bags/min., attaching a top slider or a top press-to-close zipper (PTC) feature. A stand-alone variation of the machine is equipped with an automatic bag aligner.

See the Converting Equipment page on this company's website.

B&B bag and pouch converting equipment is custom designed to meet the needs of each customer. Package formats from three-side seal and stand-up pouches to large side-gusseted and quad-seal bags are all possible. Stand-up pouch machine has features for adding tear-off notches, zipper reseal or handles in a wide variety of film structures including barrier, non-barrier, breathable and fully recyclable as well as paper. Side-gusset bag machines are dedicated to the conversion of PE materials, PET/PE, mono-materials, MDO/PE and other recyclable structures. Longitudinal side gusset formation of quad-seal bags provides a wide range of bag formats with folded, pinch and flat bottoms. Machines for wovens (WPP) bags are also available.

See the Package Forming Equipment page on this company's website.

In-line spouted pouch machine for converting flexible liquid containers. Wide range of pouch sizes, low waste, high output up to 400 ppm. Shaped contour sealing and punching allow almost unlimited design possibilities for the pouches. Welding angles (45° / 90°), as well as all KGA pouches, low tooling costs. B&B leak test able to automatically detect the smallest leaks and eject faulty bags for 100% leak-proof pouches. Clean room version and automatic SPT rail loading systems available.

See the additional offerings on the company's website.